🎁 Only Today 20% Discount Code "ONE-YEAR-LCA" For Laravel Core Adventures Get The Course →

Turn a lamp on and off with a Raspberry Pi and a Linker Kit Relay


Turning on LEDs is nice, but maybe you have bigger dreams. In this tutorial I will show you how to control a high voltage lamp with a Raspberry Pi and Linker Kit Relay.

Close up image of the relay

The idea

The plan is to control a lamp with our Raspberry Pi. Since the Pi can't be used for high voltage components we need a relay to help us. Think of a relay as a little controllable gate of a circuit. The Pi is able to control a 5V relay and in combination we can turn the lamp on or off.

The setup

Note: Circuits of high voltage are dangerous to your life. Make sure you know what you do!

Overview of the Raspberry Pi and the relay

This is what you will need:

  • Raspberry Pi 2 Model B
  • Linker Kit Baseboard Raspberry Pi
  • Linker Kit Relay Module
  • Lamp
  • Really tiny slotted screwdriver

Linker Kit modules can help you at the beginning of your IoT career. The baseboard gets just plugged onto your Pi and will provide you with several connectors for other Linker Kit modules. This way you do not have to to soldier components or use a breadboard and jumper cables to get everything together. Just plug-and-play.

Note: Of course there are other relays too that you can use without Linker Kit modules.

Connect the relay to one of the digital GPIO inputs of the baseboard. (D4 in our case) Then you need to link your lamp or other high voltage component to the relay. This is done with the hot (red or brown) wire of the device. Cut it and connect the one side to the relay input and one to the output of one of the gates. Then fix it with your insane tiny screwdriver. It doesn't matter which of the two gates you use because both are working at once.

The script

Now that we got everything set up, a python script will switch the relay on and off for us. This will happen every two seconds. A light on the relay shows when it is closed. Additionally you will hear it switch.

import RPi.GPIO as GPIO
import time
relay_pin = 4
GPIO.setmode( GPIO.BCM )
GPIO.setup( relay_pin,GPIO.OUT )
while True:

Now you should see your lamp go on and off every two seconds and it's time to do a little dance.


Linker Kit modules are quite handy but you won't find a lot of tutorials on how to use them. This is why I felt the need to write about my first usage of one of them.

Such a switch gives you a whole new world of possibilities for you next projects. Have fun and please be careful!

Did you enjoy this post?

Sign up for my newsletter to stay up to date.

You will receive monthly updates on my latest articles and products. I do care about the protection of your data. Read my Privacy Policy.